Enable Country - Session-Specific Login Credentials

Procedures

Follow the steps below to ensure your country is enabled for use in the Cisco ISE 1.3 v1 demo.

1. Navigate to the Wireless Controller located at https://wlc1.dcloud.cisco.com.
2. Login with your session-specific login credentials. The username is the name used to log in to the dCloud UI and the password is the session ID. You can obtain this information from the Session Details section of your active demo. The generic username of dcloud is also provided, and can be used with the unique session ID as password, if necessary.
3. Ensure your proper country is enabled:
   1. Navigate to Wireless > Country.
4. If your country is not there, you will need to add it. But first you have to disable the wireless networks.
   1. Navigate to Wireless and on the left tab click 802.11a/n > Network.
   2. Uncheck the 802.11a network status and click Apply.
   3. On the left tab click 802.11b/g/n > Network.
   4. Uncheck the 802.11b/g network status and click Apply.
   5. Navigate back to Wireless > Country.
   6. Select the country in the list that enables the regulatory domain of your AP and click Apply. Do not uncheck the existing countries.
5. You will re-enable the Wireless Radios once you verify your AP is connected properly in the next steps of the demo script